Mold Remediation in Hanover, PA
Hanover is a York County borough just across the line from McSherrystown and Conewago Township, and more than half its homes were built before 1960. Brick and frame houses in its large historic district bring basement and plaster mold issues. We come from Gettysburg, about 13 miles away, 24 hours a day.
Open 24 hours · Free, no-obligation estimate
Get a Free Mold Estimate
Answered 24/7. No obligation.
Local housing data
Hanover Homes by the Numbers
- Median year homes were built
- 1956
- Adams County: 1980
- Homes built before 1940
- 32.2%
- Adams County: 17.5%
- Homes built before 1960
- 56.3%
- Adams County: 29.4%
- Homes built since 2000
- 9.6%
- Adams County: 22.3%
- Renter-occupied homes
- 46.6%
- Adams County: 21.1%
- Housing units
- 8,029
- 16,584 residents
Source: U.S. Census Bureau, American Community Survey 2020 to 2024 5-year estimates, via Census Reporter. Hanover covers 3.7 square miles and sits about 13.2 miles from our Baltimore Street office.
Hanover Has the Oldest Housing in This Corner of the Region
Hanover is a borough in York County, not Adams County. It sits just across the county line from McSherrystown and Conewago Township, and we serve it as part of our regular area.
The housing here is far older than the Adams County average. The median home in Hanover was built in 1956, while the Adams County median is 1980.
About 32.2% of Hanover homes were built before 1940, compared with 17.5% in Adams County. More than half, about 56.3%, were built before 1960. The Adams County share is 29.4%.
New construction is limited. Only 9.6% of homes date from 2000 or later, compared with 22.3% across Adams County.
Renting is common. About 46.6% of Hanover homes are renter-occupied, more than twice the Adams County rate of 21.1%. With about 8,029 housing units in 3.7 square miles, the borough is dense, and its housing includes attached homes and apartments as well as single houses.
Older Hanover homes are mostly brick or wood frame, with stone or brick foundations and plaster inside. Many have basements with little drainage beyond the original walls. Attached homes share walls, roofs and sometimes plumbing runs.
Historic Streets and the Conewago Valley
Hanover traces to 1763, when Richard McAllister founded the town. Five major streets, Baltimore Street, Broadway, Carlisle Street, Frederick Street and York Street, meet at its center, a layout that dates to the town's founding.
The Hanover Historic District was added to the National Register of Historic Places in 1997. It covers about 885 acres and includes 2,632 contributing buildings. Most date from 1870 to 1946, in frame and brick, with Queen Anne, Colonial Revival and Pennsylvania German styles.
The borough lies in the Conewago Creek valley. The town grew around manufacturing, including snack makers and the large Hanover Shoe factory, which has since been converted into apartments.
Converted industrial buildings bring their own moisture issues. Masonry walls, large roof areas and new interior finishes can trap water where the original builders never expected people to live.
The borough office is at 44 Frederick Street. The Borough of Hanover website lists code and permit contacts for repairs.
Mold We Often Find in Hanover Homes
Attached-home basements with shared foundation walls
In attached homes, one basement often shares a wall with the next. Water from a neighbor's downspout or a failed pipe can wet both sides. We look for mold on joists that rest in the shared wall and on stored items near it.
Plaster and lath on exterior walls
Homes from 1870 to 1940 often have plaster on lath with no insulation. Cold walls collect condensation in winter, and roof or window leaks run down inside the cavity unseen.
Upstairs bathrooms in older apartments
Some rentals have bathrooms added long after the house was built, often without proper exhaust. Repeated showers keep ceilings damp, and leaks from old drains stain the ceiling below.
Converted mill and factory spaces
In converted buildings, we check for condensation on masonry walls, leaks at old roof penetrations, and moisture behind new drywall laid against brick.
Which Services Fit Hanover Properties
Every job starts with a mold inspection and moisture mapping. In attached homes, we note where water may be coming from next door.
For basements, see our older basement mold remediation. For bathrooms and kitchens, see mold removal in bathrooms and kitchens. Landlords and building owners can use our service for rental and commercial buildings.
The EPA notes that indoor humidity should stay below 60%, ideally between 30% and 50%. That target is hard to hold in an old basement without a dehumidifier.
Our mold remediation costs page lists typical ranges: about $500-$1,500 for a small area and $1,500-$6,000 for a basement. We give a firm price after the inspection.
Renters and owners can also read about landlord and tenant mold rules in Pennsylvania.
Buying or Selling an Older Hanover Home
Mold questions often come up when an older home changes hands, especially about basements and attics.
Buyers should ask for a mold and moisture inspection when a home has a musty basement, water stains or a history of leaks. A general home inspection may note moisture but usually does not trace its source.
Sellers in Pennsylvania generally need to disclose known material defects, and past water or mold problems can fall into that category. Fixing the moisture source and keeping the paperwork from remediation and clearance testing makes that conversation easier.
Our guide to selling a house with mold in Pennsylvania walks through the options.
Reaching Hanover From Gettysburg
We work out of 15-23 Baltimore St in Gettysburg, about 13.2 miles from Hanover. Call (717) 420-8919 any time, day or night.
Our work follows IICRC S520 and EPA guidance. We use containment, negative air and HEPA filtration, and we recommend independent clearance testing on every job.
We also serve McSherrystown and Conewago Township on the Adams County side of the line. For more about us, visit our mold remediation team in Gettysburg.
Mold Questions From Hanover
Do you serve Hanover even though it is in York County?
Yes. Hanover sits right on the Adams County line, next to McSherrystown and Conewago Township, and it is part of our regular service area. We are about 13 miles away in Gettysburg and open 24 hours.
How do you handle mold in an attached Hanover home?
We contain our side of the shared wall, find the moisture source, and remove or clean affected material. If the water is coming from the neighboring unit, we document it so both owners can address it. More on mold inside walls after a leak.
Can mold be removed from plaster walls in older Hanover homes?
Often, yes. Plaster on wood or metal lath is denser than drywall and can sometimes be cleaned when growth is on the surface. If the lath or wall cavity is wet and moldy, those sections usually need to come out. See mold on plaster walls in old homes.
I rent in Hanover and my landlord won't fix a leak. What can I do?
Notify the landlord in writing, keep photos and dates, and keep copies of every message. Leaks and other habitability problems are generally the owner's responsibility to repair. Read our overview of Pennsylvania mold laws.
Mold Services Available in Hanover
If you smell something musty, see a stain you can't explain, or are about to buy an older house, a professional mold inspection in Gettysburg, PA tells you what is growing, where the moisture is coming from, and what it will take to fix it. We look at your home the way a moisture detective would, then use air or surface testing only when it answers a real question. You get clear findings in plain language, not a scary lab printout.
Mold Inspection and Testing
Black mold removal in Gettysburg, PA starts with finding the water that feeds the mold, then sealing off the area so spores stay put while we remove what's growing. If you've found dark, slimy patches on drywall, wood, or ceiling tiles, you don't need to panic, but you shouldn't wait either. We're open 24 hours at (717) 420-8919, and we'll tell you plainly what you're dealing with and what it will take to fix.
Black Mold Removal
Basement mold remediation in Gettysburg, PA starts with one fact: most homes here sit on old stone, damp clay soil and a water table that rises every spring, so the space below your floor is the most likely place in the house for mold to grow. We remove mold from basements and crawl spaces, fix the moisture that fed it, and set the space up to stay dry through humid Adams County summers. We're open 24 hours at (717) 420-8919.
Basement & Crawl Space Mold Remediation
Crawl space mold remediation in Gettysburg, PA means cleaning the joists and subfloor, then cutting off the ground moisture that fed the mold. We work in dirt-floor, vented and sealed crawl spaces across Adams County and Hanover, and we're open 24 hours at (717) 420-8919.
Crawl Space Mold Remediation
Attic mold remediation in Gettysburg, PA starts with one question: where is the moisture coming from? We remove mold from roof sheathing, rafters and trusses, fix the ventilation or venting problem that fed it, and treat the wood so the attic stays dry and clean. We're open 24 hours at (717) 420-8919.
Attic Mold Remediation
Bathroom and kitchen mold removal in Gettysburg, PA starts with finding the water: a shower that leaks into the wall, a fan that never vented outside, or a slow drip under the sink. We remove the mold, fix the cause and keep what can be saved. We're open 24 hours at (717) 420-8919.
Bathroom & Kitchen Mold Removal
Water damage mold restoration in Gettysburg, PA starts the moment water gets where it should not be, because the clock on mold growth is already running. We dry the structure, find hidden moisture, remove anything that has started to grow mold, and put your home back on a path to normal. We are open 24 hours at (717) 420-8919 for leaks, floods and burst pipes.
Water Damage & Mold Restoration
Air duct mold removal in Gettysburg, PA works best when the whole HVAC system is treated as one unit: the ductwork, the evaporator coil, the drain pan, the blower and the air handler cabinet. We clean each part, fix the moisture that let mold grow and verify the results, and we're open 24 hours at (717) 420-8919.
HVAC and Air Duct Mold Remediation
Commercial mold remediation in Gettysburg, PA has to fit around tenants, guests, closing dates and business hours, and that is how we plan every job. We work with landlords, property managers, business owners, home sellers and caretakers of historic buildings in Gettysburg, the Adams County seat, and we are open 24 hours when a leak or a failed inspection cannot wait.
Commercial, Rental and Real Estate Mold Remediation
Mold remediation cost in Gettysburg, PA typically runs $500 to $1,500 for a small area under 10 square feet, $1,500 to $6,000 for a basement or crawl space, and $10,000 to $30,000 or more for a whole home. This page breaks down what those numbers include, what pushes a job up or down, how homeowners insurance treats mold, and how to read an estimate so you only pay for work you need.
Mold Remediation Cost
Our mold remediation process follows the IICRC S520 standard step by step, from the first inspection to independent clearance testing and rebuild, so mold in your Gettysburg home is removed at the source and the moisture that fed it is fixed. Here is what happens on a job, what it costs, and how to keep mold away.
Our Mold Remediation Process
Need Mold Remediation in Hanover?
We answer 24 hours a day. Free, no-obligation estimate after an on-site look.
